Questions
My display is blank on my SVM-10, ViP, iVS-3/600P or iVS-3
Answers
My display is blank on my SVM-10, ViP, iVS-3/600P or iVS-3
- When working with a Box Recorder your display can sometimes get out of contrast. To re-adjust the contrast do the following.
- Hook Ch1 to Voltage. Using the wall adapter to power the recorder may not work.
- Push the solid blue key two or three times.
- Hold down the blue Set key.
- While holding down the Set key start pushing one of the RED keys. “Ch or Mode”. You may have to push these keys Several times. If after you go 30-40 clicks to the right or Left and if your screen doesn’t adjust go the other way. You will have to go the other way the same number of times you just went and then start counting again. If after trying this and you still do not have a display on the screen please call 1-800-296-4120 and ask for Technical Support.